Update

 
Applications

 
Advantages:

 
For developer:

 
(Пайпы программ)

 
Companies:

 
History:

 
(Бонусы)

 
Advice:

 
(Барьеры и решения)

 
Technologies:

 
(Применение в науке, лаборатории, ..)

 
Solutions

 
New eComStation:

 
Future:

 
(Ссылки на другие сайты)

 
(Картинка дня)

 
OS/2 artefacts:

 
Gadgets:

Hardware > Motherboards Gigabyte Z68X-UD3H-B3 Homepage: Specification

?>

Gigabyte Z68X-UD3H-B3

Mark: Good

• eCS 2.1 installs fine with AHCI drivers. System would not install with non-AHCI drivers.
• Sound does not work (the board was specced with Realtek ALC889, but my board has NVidia audio, apparently, UniAud detects it, but doesn't give me anything).
• Networking is close to functional (The spec was Realtek 8111E, but I got Realtek 8111E/F) but since the board has 2 PCI slots it's easy (and cheap) to add appropriate cards.

Information is sent by: David Bongo -- 2012-06-10 12:24:06

[GoogleAdv]

Comments:

Rob Hamerling 2012-08-04 18:52:35	I'm afraid my experiences with this board (so far) are slightly different. My setup: SATA set for AHCI, native mode disabled, and in the pre-setup menu AHCI selected. First phase seems to go OK, but after the reboot I get a trap on OS2BOOT. Suggestions appreciated. Rob (info at robh.nl) PS: Audio is not recognised with me.
Rob Hamerling 2012-08-09 14:03:27	Problem with Trap 0001 in OS2BOOT (mostly) solved (thanks David)! Crucial was to have BIOS setting: Integrated Peripherals: PCH SATA Control Mode AHCI SATA Port0-3 Native Mode Enabled

Comment this note (add comments, don't expect that other users will reply or join discussions here)
	Your Name: Your E-Mail: CODE: 464764
Your Comment:

eCo Software is participating in the conferences. We made more than 15 presentations. We published more than 10 reports.

 
For dummies

 
Reviews